Roof Mounted TV Bracket

Ceiling Mounted TV Bracket for upto 55 Inch Televisions

LCD Ceiling Mount Fixing Bracket for Sony, Panasonic, Philips, LG, Toshiba, Goodmans, Hitachi, Goodmans, JVC, Pioneer, Samsung, Sharp, Proline, Siemens and many other makes of LCD and Plasma TV.

SOLCPLB102M Full 360° Motion Universal TV Ceiling/Roof Mounting Bracket with Tilt for 32" - 55" Televisions

The SOLCPLB102M is a 360° full motion ceiling mount bracket for LCD / Plasma TV's 32" to 55". The mounted TV can swivel 360° and tilt up to 20°. The length of the hanging tube can vary in three steps: 60cm, 70cm, and 80cm.

As the tubes are hollow, the power and signal cables can be hidden inside, hence the ideal choise for big class rooms, meeting rooms, shopping centre and hotel receptions and many more places.

.

Our Price £49.95 + £10 Delivery = £59.95

Technical Data

360° full motion ceiling mount bracket, tilt up to 20°
Made from heavy-duty cold steel, powder coated in fashionable black
Suitable for all those plasma/LCD TVs with wall-mounting hole pattern within 720x500mm (Horizontal x Vertical), including those compatible with VESA 600x400, VESA 400x400, VESA 400x200 and VESA 200x200 mounting standard.
The length of the hanging tube can very from 60cm, 70cm, or 80cm (from ceiling to the end of the tube, not to the bottom of TV)
Cable management: cables can be hidden inside the tube
The overall size (not including the telescopic tube): 765 x 530mm (Horizontal x Vertical)
Full set of fittings included

Plate Fixing Measurments ( Part that fixes to the joist )

The plate is 16cm square

The screw hole fixing gaps are 12.5cm apart and have the ability due to the hole being a rectangle and have two either side can be fixed between 6 – 12 cm’s apart

Our Price £49.95 + £10 Delivery = £59.95

How do I choose the right size ceiling/wall mount for my LCD/Plasma TV?

First, check the back of your TV and find the four threaded holes (if there is no threaded holes or less then four holes, then the TV is not classified as wall-mountable nor ceiling mountable);
Secondly, measure the horizontal and vertical distances between them (in mm); for example, horizontal = 400mm; vertical =200mm
Now select a bracket whose supported max. mounting-hole pattern is larger than one you have just measured; but the overall size should be smaller than the TV otherwise the bracket will be stickout from the back of the TV.

LCD and Plasma TV Bracket Index